Surgident Universal Screw Removal Kit

Universal Screw Removal Kit - SURGIDENT®   A variety of screw removal instruments are included which allow clinicians to remove both fractured and stripped prosthetic screws. This kit provides everything. Screw Removal Components Prosthetic guide holder Long ratchet wrench Adapter (contra Angle to 4mm square) Reverse drills Reverse taps Flat tip driver Prosthetic guides (listed below) External Mini (M) Hi-Tec Summit Nobel Biocare Branemark System NP Octa Internal (O) Hi-Tec Tite-Fit & Tapered Tite-Fite Straumann ITI Tissue Level Implant Direct SwishPlant TSV 3.7I4.1 Hi-Tec Logict, Spark, Self-Thread BioHorizons Tapered Internal 3.7 and 4.70 Implant Direct Legacy (3.7 and 4.7 internal hex) MIS 3.3. 3.75. and 4.20 Zimmer TSV 3.7. 4.1 and 4.70 External Regular (W) Nobel Biocare Branemark System RPO Hex Submerged (H) Hi-Tec Logic, Implex, ExpertNL Nobel Biocare NobelActive Trilobe 3.5 NP Hi-Tec Vision@ 3,5 Nobel Biocare Tri Lobe@ 3.5 Instructions for Stripped Screw Removal Stripped screws are generally more difficult to remove than fractured screws because fractured screws are not under compression. The most effective method of removing a stripped screw is to create a flathead channel with a round bur, and then use a flat head driver to reverse the screw out of position. Step 1 Using a 1/2 round bur in a high-speed handpiece, create a channel on the head of the screw across the diameter of the head, creating a flat head. Step 2 After the channel is created, use the FTD-01 and ratchet wrench to back the screw out. Instructions for Fractured Screw Removal Step 1 Press the remover drill (D-REM) in the reverse direction (under 80rpm) on the top of the fractured screw to reverse the screw fragment out of the screw channel. Step 2 If the remover drill is unsuccessful: Use the provided guide information to select the correct prosthetic guide -based on the implant platform. Step 3 Attach the selected guide to the guide handle and engage the connection within the implant. Step 4 With your handpiece in reverse (1,200-1,300 rpm); create a divot in the top of the screw with the D-REM.